Get Instant Solution By an Expert Advisor
(4.8)
You may already be manufacturing asbestos cement building boards. You may even be supplying them for roofing, cladding or partitions. But if those boards are not certified under IS 2098:1997 you are exposed to legal risk
This is not just paperwork. It is a statutory requirement
Under the BIS Act certain construction materials must carry the ISI Mark before they enter the Indian market. Asbestos cement building boards fall in that category. The governing authority is the Bureau of Indian Standards (BIS) and the applicable specification is IS 2098:1997
IS 2098:1997 is not a broad guideline. It is a technical document. It defines how asbestos cement building boards must perform.
The standard lays down:
You are expected to manufacture in alignment with these parameters. If your product fails even one critical test certification does not move forward
This is why reading only summaries is risky. You must work from the official standard
If your product falls under the notified category, you cannot manufacture or sell without an ISI Mark licence. BIS certification under Scheme-I (ISI Mark Scheme) is compulsory where notified through Quality Control Orders issued by the Government of India.
Non-compliance can result in:
It is better to correct compliance gaps before production scale increases.
Many manufacturers assume BIS only checks final products. That is not correct
BIS examines your entire capability to produce compliant boards consistently
During certification they evaluate:
You are not being judged on one good batch. You are being evaluated on your system
Before filing any application, make sure:
If these elements are weak the inspection will expose it
You apply through the official BIS online portal. The application requires:
Incomplete submissions lead to objections. Accuracy matters here
After scrutiny of documents BIS assigns an inspecting officer.
The officer visits your factory. They check:
They may draw product samples during the visit
You should treat this inspection seriously. It is technical in nature
The collected samples are tested in a BIS-recognized laboratory as per IS 2098:1997 requirements.
The laboratory verifies:
Only if all parameters meet the standard will the process proceed
If inspection findings and lab reports are satisfactory BIS grants the licence.
You receive:
From that point, you can mark your boards legally
Certification does not end with licence issuance.
You must:
BIS can conduct surprise inspections. Market samples may also be picked for verification
Consistency is the real compliance requirement.
BIS ISI Mark Registration for Glass Fibre Reinforced Gypsum Panels IS 17400:2021
From experience, delays usually occur because of:
These are avoidable mistakes.
Handling BIS certification requires regulatory clarity and structured documentation. If your internal team is not familiar with BIS procedures you may face repeated queries
Agile Regulatory supports you by:
The advantage is not speed alone. It is correctness
When your documentation and systems are aligned from the beginning, approvals move more smoothly.
The timeline depends on your readiness.
If your testing, documentation, and facility are prepared, certification can move efficiently. If gaps exist expect delays
Costs include:
Always verify the latest fee structure directly from the official BIS portal
If you manufacture asbestos cement building boards under IS 2098:1997 you are operating in a regulated space. BIS ISI Mark certification is not optional. It is mandatory for the lawful sale and long-term market credibility
Approach the process methodically. Prepare your systems. Verify your testing. Align your documentation. Do not rely on assumptions
If you want structured guidance and practical support through every stage of BIS ISI Mark registration Agile Regulatory can help you move forward with clarity and compliance
Plan properly. Execute correctly. Secure your certification without unnecessary setbacks.
Post Views: 996
Vanshika Mathur
06 Mar, 2026
Divya Saxena
06 Mar, 2026
Nishi Chawla
06 Mar, 2026
Divya Saxena
06 Mar, 2026
Nishi Chawla
06 Mar, 2026
Get Instant Solution By an Expert Advisor
(4.8)
You might also be interested in these articles.
Nishi Chawla
03 Mar 2026
BIS ISI Mark registration for asbestos cement pipes and fittings under IS 6908:1991 ensures quality compliance for sewerage and drainage systems.
Nishi Chawla
27 Feb 2026
BIS registration under the Bureau of Indian Standards (BIS) is mandatory for manufacturers of asbestos cement cable conduits and troughs in India.
Nishi Chawla
27 Feb 2026
BIS Registration for Silica-Asbestos-Cement Flat Sheets under IS 13000:1990 is mandatory to ensure product quality and safety compliance in India. Manufacturers must meet the standards set by the Bureau of Indian Standards before selling in the Indian mar
Nishi Chawla
24 Feb 2026
BIS registration for Shallow Corrugated Asbestos Cement Sheets under IS 13008:1990 is mandatory in India to ensure product quality, safety, and compliance with national standards.
Nishi Chawla
24 Feb 2026
BIS Registration for Asbestos Cement Pressure Pipes (Light Duty) under IS 9627:1980 is mandatory for compliance in India. Manufacturers must obtain ISI Certification to ensure product quality and safety standards. We provide end-to-end support for docum
Nishi Chawla
23 Feb 2026
This guide explains the process of obtaining BIS (Bureau of Indian Standards) registration for fibre cement flat sheets as per the IS 14862:2000 standard, ensuring compliance with Indian quality and safety regulations.
Nishi Chawla
23 Feb 2026
BIS registration for fiber-reinforced cement products under IS 14871:2000 ensures quality, safety, and compliance with Indian standards.
Nishi Chawla
20 Feb 2026
BIS Registration for Water Meters (Domestic Type) under IS 779: 1994 is mandatory to ensure quality, accuracy, and compliance with Indian standards. The certification verifies that domestic water meters meet performance, safety, and durability requirement
Nishi Chawla
20 Feb 2026
BIS registration ensures ferrules for water services comply with IS 2692:1989 prescribed national standards set by Bureau of Indian Standards.
Nishi Chawla
18 Feb 2026
Get Bureau of Indian Standards (BIS) ISI Mark Registration for Glass Fibre Reinforced Gypsum (GFRG) Panels as per IS 17400:2021. This certification ensures that GFRG panels meet the required quality, strength, safety, and performance standards for use in
Nishi Chawla
18 Feb 2026
BIS ISI Mark Registration for Gypsum Plaster Boards – Coated/Laminated is mandatory as per IS 2095 (Part 2): 2022 to ensure product quality and safety compliance in India. Manufacturers must obtain certification from the Bureau of Indian Standards before
Nishi Chawla
17 Feb 2026
BIS ISI Mark Registration under IS 302 (Part 2/Sec 21): 2018 is mandatory for manufacturers of stationary storage-type electric water heaters in India.
Nishi Chawla
17 Feb 2026
BIS ISI Mark certification is mandatory for Reinforced Gypsum Plaster Boards and Ceiling Tiles under IS 2095 (Part 3):2022. The certification ensures product quality, safety, and compliance with Bureau of Indian Standards norms. Our experts provide comp
Nishi Chawla
16 Feb 2026
BIS ISI Mark Registration under IS 368:2014 certifies electric immersion water heaters for safety, quality, and compliance standards in India.
Nishi Chawla
16 Feb 2026
BIS ISI Mark Registration for Electric Instantaneous Water Heaters is mandatory under IS 302 standards in India. Manufacturers must obtain certification from the Bureau of Indian Standards (BIS) to ensure product safety, quality, and compliance with India
Nishi Chawla
29 Jan 2026
We provide expert BIS consultancy in Delhi and Haryana, helping businesses obtain Bureau of Indian Standards certification quickly and efficiently. Our experienced consultants guide you through compliance, documentation, and registration, ensuring a smoot
Nishi Chawla
29 Jan 2026
BIS certification costs vary by product, scheme, and manufacturer. Typical fees include application (₹1,000–₹5,000), testing (₹15,000–₹75,000+), inspection/audit charges, annual license, and marking fees.
Nishi Chawla
27 Jan 2026
This standard (IS 2082:2018) specifies the requirements for stationary storage-type electric water heaters. It covers aspects like design, construction, performance, safety, and testing to ensure reliable and safe operation of these appliances. Manufactur
Nishi Chawla
27 Jan 2026
BIS ISI mark registration certifies that mini domestic water heaters for use with piped natural gas (PNG) meet the quality and safety standards outlined in IS 17150:2019. This certification ensures compliance, consumer trust, and market acceptance of your
Nishi Chawla
22 Jan 2026
The Bureau of Indian Standards (BIS) mandates Compulsory Registration Scheme (CRS) certification for USB-type external solid-state storage devices with capacities above 256 GB.
Nishi Chawla
22 Jan 2026
BIS CRS Registration for Wireless Headphones and Earphones as per IS 616:2017 is mandatory for selling these products in India. It ensures safety, quality, and legal compliance while helping brands gain customer trust and smooth market entry.
Nishi Chawla
21 Jan 2026
BIS ISI Mark Registration for V-Belts under IS 2494 (Part 1): 1994 specifies the quality, performance, and safety requirements for endless V-belts used in general industrial applications, ensuring durability, reliability, and compliance with Indian standa
Nishi Chawla
21 Jan 2026
BIS ISI Mark Registration for fire resistant and antistatic endless V-belts is mandatory under IS 2494 (Part 2): 1993
Divya Saxena
20 Jan 2026
BIS CRS Registration 2026 introduces revised rules for testing, labeling, and documentation to strengthen product safety and compliance.
Nishi Chawla
09 Jan 2026
BIS CRS Registration for Electronic Musical Systems with input power below 200 Watts is mandatory under IS 616:2017 to sell products in the Indian market. The certification ensures product safety, quality, and compliance with Indian standards as notified
Nishi Chawla
09 Jan 2026
BIS CRS registration is mandatory for standalone Switch Mode Power Supplies (SMPS) with a maximum output voltage of 48V under the Compulsory Registration Scheme (CRS)
Nishi Chawla
08 Jan 2026
This standard covers the BIS ISI certification requirements for endless narrow V-belts (type V) used in industrial transmission devices, ensuring compliance with IS 14261:1995.
Nishi Chawla
08 Jan 2026
BIS ISI Mark registration for telescopic ball bearing drawer slides under IS 17954:2023 ensures that these products conform to the Indian Standards for quality, safety, and performance..
Nishi Chawla
06 Jan 2026
BIS CRS Registration for Digital Camera as per IS 13252 (Part 1): 2010 is a mandatory regulatory requirement in India under the Compulsory Registration Scheme (CRS). It mandates that all digital cameras manufactured or imported for sale in India must comp
Nishi Chawla
05 Jan 2026
BIS CRS Registration for Television other than Plasma/LCD/LED TVs as per IS 616:2017 is mandatory for manufacturers intending to sell such products in the Indian market. This certification ensures that televisions comply with Indian safety and quality sta
Nishi Chawla
05 Jan 2026
BIS CRS Registration for Rice Cooker IS 302-2-15:2009 is a mandatory compliance requirement in India to ensure the safety and quality of electrical rice cookers
Nishi Chawla
02 Jan 2026
BIS CRS registration for wireless microphones under IS 616:2017 is a mandatory compliance requirement in India to ensure product safety, quality, and performance.
Nishi Chawla
26 Dec 2025
BIS ISI Mark Registration for cross-recessed drilling screws with tapping screw thread (Part 2) and countersunk head ensures compliance with Indian quality and safety standards, certifying that the fasteners meet specified performance, material, and manuf
Nishi Chawla
26 Dec 2025
This standard specifies BIS ISI Mark Registration requirements for cross recessed drilling screws with tapping screw thread and pan head, in accordance with IS 18471 (Part 1): 2023 aligned with ISO 15481:1999.
Nishi Chawla
24 Dec 2025
BIS CRS Registration for Webcams is mandatory in India under IS 616:2017. The certification ensures product safety, quality, and compliance with Indian standards before market sale. This process involves lab testing, documentation, and BIS approval for ma
Nishi Chawla
24 Dec 2025
BIS CRS registration is mandatory for importing or selling video cameras (with or without display) in India under IS 616:2017. The registration ensures that the product meets (BIS) safety, performance, and quality requirements.
Nishi Chawla
23 Dec 2025
BIS ISI Mark Registration for Cross Recessed Drilling Screws ensures compliance with IS 18471 (Part 3):2023 and ISO 15483:1999 standards. This certification is mandatory for manufacturers producing raised countersunk head drilling screws with tapping scre
Nishi Chawla
23 Dec 2025
BIS ISI Mark Registration for Fasteners such as Hexagon Washer Head Drilling Screws with Tapping Screw Thread is mandatory under IS 18476: 2023 / ISO 15480: 2019. This certification ensures product quality, safety, and compliance with Indian Standards. Ma
Nishi Chawla
22 Dec 2025
The BIS requires that smart speakers, whether they have a display or not, comply with IS 616:2017 for safety and performance.
Nishi Chawla
22 Dec 2025
BIS CRS Registration for dimmers used in LED products as per IS 60669-2-1:2008 ensures safety, quality, and regulatory compliance for manufacturers and importers in India.
Nishi Chawla
16 Dec 2025
BIS CRS Registration for Bluetooth Speakers under IS 616:2017 is mandatory for manufacturers and importers selling Bluetooth audio devices in India. The certification ensures product safety, quality, and compliance with Indian standards, enabling lawful m
Nishi Chawla
16 Dec 2025
BIS CRS Registration for Ortho Polyphosphoric Acid (IS 798:2020) ensures that the chemical complies with Indian quality, safety, and performance standards. Registration under the Bureau of Indian Standards’ Compulsory Registration Scheme (CRS) is mandator
Nishi Chawla
15 Dec 2025
BIS CRS Registration for Polyphosphoric Acid as per IS 17439:2020 is mandatory for manufacturers and importers to ensure product quality, safety, and regulatory compliance in India. The certification confirms that the product meets prescribed Indian stand
Nishi Chawla
15 Dec 2025
BIS CRS registration for Trimethyl Phosphite Technical Grade under IS 17412:2020 ensures the product meets Indian quality, safety, and compliance standards for regulated use.
Nishi Chawla
12 Dec 2025
IS 18112:2025 BIS CRS Registration for Television Sets ensures that all TVs sold in India meet the latest safety, performance, and quality standards. Under the BIS Compulsory Registration Scheme (CRS), manufacturers and importers must obtain BIS approval
Nishi Chawla
12 Dec 2025
BIS CRS Registration under IS/IEC 62368-1:2023 ensures that Augmented Reality (AR), Virtual Reality (VR), and Mixed Reality (MR) devices comply with updated Indian safety and performance standards for audio-video, ICT, and related equipment. Manufacturers
Nishi Chawla
11 Dec 2025
Here is a short and clear summary: **Summary:** BIS Registration for Medical Devices under **IS 23485** ensures that manufacturers follow mandatory Quality Management System (QMS) standards for safety, performance, and reliability. This certification
Nishi Chawla
11 Dec 2025
BIS CRS registration for Lead Acid Batteries under IS 16270:2014 is a mandatory certification ensuring product safety, performance, and quality before they can be sold in the Indian market. Manufacturers must obtain BIS approval, comply with testing requi
Nishi Chawla
10 Dec 2025
BIS ISI Mark Registration for Pan Head Screws with Type H or Type Z Cross Recess under IS 7483 ensures that manufacturers comply with the prescribed quality and safety criteria for fasteners. This certification enhances product reliability, market accepta
Nishi Chawla
10 Dec 2025
BIS ISI Mark Registration for Cross Recessed Tapping Screws under IS 18480 ensures that manufacturers meet the required performance, durability, and safety parameters for these precision fastening components. The certification verifies product quality thr
Nishi Chawla
09 Dec 2025
BIS ISI Mark Registration for Raised Countersunk Head Screws (Common Head Style) with Type H or Type Z is granted as per IS 7486:2018 / ISO 7047:2011. This certification ensures compliance with dimensional accuracy, material quality, and mechanical perfo
Nishi Chawla
09 Dec 2025
BIS ISI Mark Registration for Drywall Screws under IS 18507:2024 ensures that manufacturers comply with the mandatory quality and safety standards applicable to drywall fastening products in India. The certification verifies critical parameters such as ma
Nishi Chawla
08 Dec 2025
BIS ISI Mark Registration for Chipboard Screws under IS 18508:2024 ensures that manufacturers comply with the latest quality and performance specifications for chipboard fasteners. This certification helps businesses improve product reliability, meet regu
Nishi Chawla
08 Dec 2025
BIS ISI Mark Registration for Cross-Recessed Countersunk Head Wood Screws (IS 18509:2023) ensures that wood screws meet the quality and performance standards set by the Bureau of Indian Standards. This registration helps manufacturers demonstrate product
Nishi Chawla
05 Dec 2025
BIS ISI Mark Registration for Commercial and Household Electrical Appliances under IS 302 (Part 1): 2024 ensures product quality, electrical safety, and regulatory compliance. Manufacturers must meet testing and labelling requirements aligned with IEC 60
Nishi Chawla
05 Dec 2025
BIS ISI Mark Registration for Chain Pipe Wrenches under IS 4123:1982 ensures product reliability and compliance with Indian standards. Manufacturers must undergo testing and certification to demonstrate product durability and safety. Agile Regulatory ass
Nishi Chawla
04 Dec 2025
BIS ISI Mark Registration under IS 4508:1992 is mandatory for manufacturers of Open Ended Slugging Wrenches. The process involves product testing, application filing, and BIS inspection. Agile Regulatory helps manufacturers complete the certification smo
Nishi Chawla
04 Dec 2025
BIS ISI Mark Registration for Ring Slugging Wrenches (Spanners) IS 4509: 1992 allows manufacturers to certify their products under the Bureau of Indian Standards. This registration ensures that ring slugging wrenches meet the required quality, performance
Nishi Chawla
03 Dec 2025
BIS ISI Mark Registration for Ring Wrenches (Spanners) under IS 2029:1998 ensures that manufacturers comply with the required quality and performance benchmarks. The certification helps build product reliability and market acceptance. Agile Regulatory ass
Nishi Chawla
03 Dec 2025
BIS ISI Mark Registration for Single-Ended Open-Jaw Adjustable Wrenches under IS 6149:1984 ensures reliable quality and compliance for tool manufacturers. Agile Regulatory helps businesses manage application filing, product testing, and certification for
Nishi Chawla
03 Dec 2025
BIS ISI Mark Registration for Open-Jaw Wrenches (Spanners) under IS 2028:2004 ensures that manufacturers produce tools that meet prescribed quality, performance, and safety standards. The certification process includes product testing in a BIS-approved la
Nishi Chawla
02 Dec 2025
BIS ISI Mark Registration for pipe wrenches under IS 4003 (Part 1): 1978 certifies that the products meet Indian standards for quality and safety. Agile Regulatory helps manufacturers and suppliers obtain this certification efficiently, ensuring their too
Nishi Chawla
02 Dec 2025
BIS ISI Mark Registration for Pipe Wrenches – Heavy Duty (IS 4003 Part 2: 1986) ensures that manufacturers meet the compulsory quality and safety standards required for producing heavy-duty pipe wrenches in India. This certification verifies durability, p
Nishi Chawla
02 Dec 2025
BIS ISI Mark Registration for Combination Side Cutting Pliers (IS 3650:1981) ensures that these hand tools comply with the required quality, durability, and safety standards. Manufacturers must follow the specified testing and documentation process to obt
Nishi Chawla
26 Nov 2025
IS 9873 Part 1:2019 outlines essential BIS safety requirements for toys sold in India. It covers mechanical, physical, and chemical safety tests to ensure child protection. Manufacturers and importers must obtain BIS certification before selling toys in t
Nishi Chawla
26 Nov 2025
BIS ISI Mark Registration for Composite Cement under IS 16415 ensures product quality, durability, and compliance with Indian standards. Manufacturers must undergo testing, documentation, and factory inspection to obtain the ISI certification. Agile Regul
Nishi Chawla
22 Nov 2025
BIS ISI Mark Registration for Grey Iron Casting IS 210:2009 is a certification process by the Bureau of Indian Standards (BIS) that ensures grey iron casting products comply with the IS 210:2009 standard. This certification verifies the product’s quality,
Nishi Chawla
22 Nov 2025
BIS ISI Mark Certificate for Grain Oriented Electrical Steel Sheet and Strip (CRGO) IS 3024 ensures that your CRGO steel products comply with the Indian Standards for quality and performance. Agile Regulatory provides expert guidance and support to help m
Nishi Chawla
18 Nov 2025
BIS ISI Mark Registration for Personal Protective Equipment Safety Footwear (IS 15298) ensures compliance with Indian safety standards, helping manufacturers certify their products for quality, durability, and workplace safety.
Nishi Chawla
14 Nov 2025
BIS Registration for Lithium-Ion Batteries under the Compulsory Registration Scheme (CRS) is mandatory for manufacturers and importers in India. This certification ensures that lithium-ion batteries meet the safety, quality, and performance standards set
Nishi Chawla
14 Nov 2025
The BIS Certificate of Conformity under Scheme 4 is issued to products that require standardized testing and quality compliance. This certificate ensures that your products meet BIS standards before reaching the market. The process includes product testin
Nishi Chawla
13 Nov 2025
BIS ISI Mark Registration for Solar Thermal Systems, Devices and Components ensures that solar products meet Indian quality and safety standards. Agile Regulatory assists manufacturers and suppliers in obtaining certification smoothly and efficiently, mak
Nishi Chawla
13 Nov 2025
BIS ISI Mark Registration for Ropes and Cordages ensures product quality, durability, and safety compliance as per Indian Standards. With Agile Regulatory’s assistance, manufacturers can easily obtain BIS certification for ropes and cordages, ensuring leg
Nishi Chawla
12 Nov 2025
BIS ISI Mark Registration for Concrete Masonry Units (Autoclaved Cellular Aerated Blocks) ensures that these building materials comply with the quality and safety standards set by the Bureau of Indian Standards. Obtaining the ISI certification helps manuf
Nishi Chawla
12 Nov 2025
BIS ISI Mark Registration for High Strength Deformed Steel Bars and Wires ensures compliance with quality standards for concrete reinforcement products. This certification helps manufacturers demonstrate product reliability, gain market trust, and meet re
Nishi Chawla
11 Nov 2025
BIS ISI Mark Registration for Tungsten Filament Lamps (IS 418:2004) ensures that lamps meet the quality, safety, and performance standards set by the Bureau of Indian Standards. Manufacturers must undergo product testing and factory inspection to obtain t
Nishi Chawla
06 Nov 2025
The BIS Certificate (ISI Mark) for Portland Pozzolana Cement (IS 1489: Part 2) is mandatory for quality control. It ensures this cement type meets critical national standards for strength, safety, and durability, guaranteeing product reliability in constr
We simplify compliance through a proven 4-step process: Consultation, Documentation, Submission, and certification. From understanding requirements to getting final approvals, we deliver a smooth, timely, and fully compliant journey for your business.
What our customer says about us
Fantastic support from the team. Their expertise transformed our approach, driving remarkable outcomes. A must-have partner for businesses seeking effective consulting solutions. Highly recommended.
KTPL Instruments
Agile Regualtory delivers exceptional solutions. Their insightful guidance streamlined our processes and boosted profitability. Highly recommended for businesses seeking expert consulting services to thrive.
Justrack IOT
Impressed by Agile Regulatory's expertise. Their strategic insights and practical solutions have elevated our business operations. A reliable partner for effective consulting services. Highly recommended for growth-focused businesses.
Coaire Compressor
Extraordinary consulting services. Their insightful solutions and dedicated team reshaped our business, driving remarkable improvements. Highly recommend it for transformative results.
Easy Polymer
Incredible experience with Agile Regulatory. Their innovative strategies and expert advice revitalized our business model, resulting in impressive growth. Highly recommend their exceptional consulting services.
Tarus International
Top-tier consulting! offered strategic solutions that revolutionized our approach. Their deep expertise and personalized guidance made a significant impact on our success. Highly recommend their services.
Anchor Weighing
Agile Regulatory exceeded expectations! Their tailored solutions, expertise, and proactive approach led to remarkable results. Highly recommend for businesses seeking impactful and strategic guidance.
AM Capacitor
Outstanding service! delivered targeted solutions with professionalism and expertise. Their insights elevated our business strategies, resulting in noticeable growth. Highly recommended for exceptional consultation.
Imaxx Pro Aquistic
Trusted by over 1,00,000 + Global Brands in the past 15+ years
.webp)
.webp)
Leave a Reply
Your email address will not be published. Required fields are marked *